Plug-and-Play OPF cartridge filters

OPF filter and nothing else needed

The OPF cartridge filter is the best solution for a compact aspiration system; the standard filter kit has a Plug-and-Play design. The filter has a built-in spark suppression system, a fan, a noise-absorbing casing, a controller and a control panel – just connect the power.


The OPF filter with horizontal cartridges is a concentration of the experience and knowledge of TAMA engineers. The filter is designed to make system design, equipment selection and installation as easy as possible. Plug-and-Play – as standard, the filter contains everything you need to operate, you just need to connect the power and the aspiration system is ready to start.

A modern approach to air flow

Thanks to the downward air flow and horizontal filter element, the filter has natural preseparation, which reduces the dust load on the aspiration filter and increases the service life of the filter elements. Compared to other filters with vertical cartridges and upward air flow, the OPF model lasts almost 2 times longer before replacing the filter elements.

Innovative filter cartridges

In OPF filters we use an innovative filter fabric with a nanofiber membrane. It provides surface filtration, which greatly increases the service life of the filter elements, the highest degree of filtration of 99.99% and a stable pressure drop throughout the entire service life.

Find out more about available filter media

Regeneration of filter elements

The filter element regeneration system has a classic design - cleaning with pulses of compressed air. The filter is equipped with Venturi tubes that ensure uniform, 50% more efficient, cleaning of the filter elements. This allows the filter to work longer and more consistently before replacing the filter elements.


To enable continuous operation in the aspiration system, the filter is equipped with a differential pressure controller, which monitors the degree of contamination of the filter elements in real time and activates the regeneration system only when necessary. Thanks to this, TAMA cartridge filters have reduced compressed air consumption, which saves on energy costs and also ensures more stable operating parameters of the aspiration system.

Clev AIR dynamic power - the right amount of air exactly when you need it!

This is an innovative system for dynamic control of the performance of the aspiration system. Designed specifically for use in aspiration systems for laser cutting of metal. The ClevAIR system is the result of joint research between Libellula and Tama. Far superior to standard aspiration systems, it creates and synchronizes the connection between the laser cutting equipment control software and the aspiration system.
ClevAIR allows you to adjust the aspiration power according to the actual smoke emission, significantly reducing energy consumption, increasing system life and reducing noise levels for at least 90% of laser operating time.

Results of the OPF filter with the Clev AIR system, compared to other aspiration systems.

There is nothing easier than replacing the cartridges in the OPF filter

The horizontal arrangement of the cartridges allows for quick and easy access to the filter elements. This reduces the time required to replace filter elements by 10 times compared to classic cartridge filters.

Explosion-proof version ATEX, model OPF-X

Check valve - isolates explosion from propagation
through air ducts to adjacent equipment.

Explosion pressure release – ATEX version of cartridge filter,
is equipped with an explosion-proof rupture disc, which releases excess pressure and flame in the event of a dust explosion.

Flame filter – an additional filter can be equipped
flame arrester to filter the ejected flame,
which makes it possible to safely release an explosion even into a room.

Built-in ATEX fan
ATEX controller
, lbFor optimal control of the cleaning system
Built-in pressure regulator

Unloading system
lbAvailable with 100 l hopper or automatic big bag unloading system.
Reinforced body

For safe operation of the filter when filtering explosive dust, TAMA OPF cartridge filters are supplied in an explosion-proof version:

Explosion pressure release – ATEX version of the cartridge filter, equipped with an explosion-proof bursting membrane, which, in the event of a dust explosion, releases excess pressure and flame.

Flame filter – additionally, the filter can be equipped with a flame arrester to filter the ejected flame, which makes it possible to release an explosion even into a room.

Explosion isolation – a non-return valve to cut off an explosion, avoiding the spread of an explosion through air ducts into adjacent equipment.

To reduce the likelihood of an explosion and eliminate one of the ignition sources, the ATEX version of the filter is equipped with antistatic filter elements, grounded, and all external components are Ex CAT 3D.

The listed measures allow the use of a cartridge filter to filter explosive dust and install it in explosive dust environments.

Modular design – compact design

The OPF cartridge filter, like all TAMA aspiration filters, has a modular design, which allows you to assemble a ready-made Plug-and-Play filter to suit your needs. Modular design - production in a short time and variability of sizes based on the location of the filter.

Available filter models

Filter version
Filter version Standard Option
Painted steel
Compressed air regeneration system
Filter Controller
Hatches for replacing filter elements
Inlet/outlet flanges
Storage container
Pressure regulator
Sound-absorbing casing
Explosion-proof version ATEX
Rotary valve
Filter maintenance area
Air ducts
ClevAIR dynamic power
Filter elements Standard Option
Ultra-Web FR; Ultra-Web SB; Ultra-Web AS;
Fibra-Web; Thermo-Web; Torit-Tex; High Temp
Разработаем индивидуальное техническое решение для аспирации вашего технологического процесса
Our projects