Review
The Modul Air filter, with horizontal cartridges, is a concentration of 35 years of experience and knowledge of TAMA engineers. The filter incorporates all modern innovations in filtration technologies, optimized air flows, nanofiber cartridges, and the flexibility of the modular design allows it to be used in almost any technological process.
A modern approach to air flow
Thanks to the downward air flow and horizontal filter element, the filter has natural preseparation, which reduces the dust load on the aspiration filter and increases the service life of the filter elements. Compared to other filters with vertical cartridges and upward air flow, the Modul Air model lasts almost 2 times longer before replacing the filter elements.
Innovative filter cartridges
In Modul Air filters we use an innovative filter fabric with a nanofiber membrane. It provides surface filtration, which greatly increases the service life of the filter elements, the highest degree of filtration of 99.99% and a stable pressure drop throughout the entire service life.
Find out more about available filter media
Regeneration of filter elements
The filter element regeneration system has a classic design - cleaning with pulses of compressed air. The filter is equipped with Venturi tubes that ensure uniform, 50% more efficient, cleaning of the filter elements. This allows the filter to work longer and more consistently before replacing the filter elements.
Controller
To enable continuous operation in the aspiration system, the filter is equipped with a differential pressure controller, which monitors the degree of contamination of the filter elements in real time and activates the regeneration system only when necessary. Thanks to this, TAMA cartridge filters have reduced compressed air consumption, which saves on energy costs and also ensures more stable operating parameters of the aspiration system.
EcoNet PLUS
Optionally, it is possible to install the EcoNet PLUS system for complete remote control of the operation of the aspiration system. This information will help you eliminate unplanned system shutdowns, monitor key system indicators and identify possible malfunctions in advance.
Replacing cartridges in the Modul Air filter is very easy!
The horizontal arrangement of the cartridges allows for quick and easy access to the filter elements, which reduces the time spent on replacing filter elements by approximately 10 times compared to classic cartridge filters.
Explosion-proof version ATEX
Check valve - isolates explosion from propagation
through air ducts to adjacent equipment.
Explosion pressure release – ATEX version of cartridge filter,
is equipped with an explosion-proof rupture disc, which releases excess pressure and flame in the event of a dust explosion.
Flame filter – an additional filter can be equipped
flame arrester to filter the ejected flame,
which makes it possible to safely release an explosion even into a room.
For safe operation of the filter when filtering explosive dust, TAMA Modul Air cartridge filters are supplied in an explosion-proof version:
Explosion pressure release – ATEX version of the cartridge filter, equipped with an explosion-proof bursting membrane, which, in the event of a dust explosion, releases excess pressure and flame.
Flame filter – additionally, the filter can be equipped with a flame arrester to filter the ejected flame, which makes it possible to release an explosion even into a room.
Explosion isolation – a non-return valve to cut off an explosion, avoiding the spread of an explosion through air ducts into adjacent equipment.
To reduce the likelihood of an explosion and eliminate one of the ignition sources, the ATEX version of the filter is equipped with antistatic filter elements, grounded, and all external components are Ex CAT 3D.
The listed measures allow the use of a cartridge filter to filter explosive dust and install it in explosive dust environments.
Modular design – compact design
The Modul Air cartridge filter, like all TAMA aspiration filters, have a modular design, which allows you to assemble a ready-made Plug-and-Play filter to suit your needs. The modular design of the suction filter is produced in a short time and offers size variability based on the location of the filter.
Available filter models
Filter version
| Filter version | Standard | Option |
|---|---|---|
|
Painted steel |
+ |
|
|
Compressed air regeneration system |
+ |
|
|
Filter Controller |
+ |
|
|
Hatches for replacing filter elements |
+ |
|
|
Inlet/outlet flanges |
+ |
|
|
Racks |
+ |
|
|
Storage container |
+ |
|
|
Pressure regulator |
|
+ |
|
Fan |
|
+ |
|
Sound-absorbing casing |
|
+ |
|
Switchboard |
|
+ |
|
Explosion-proof version ATEX |
|
+ |
|
Rotary valve |
|
+ |
|
Filter maintenance area |
|
+ |
|
Air ducts |
|
+ |
|
EcoNet PLUS |
|
+ |
| Filter elements | Standard | Option |
|---|---|---|
|
Cellulose with nanofiber membrane |
+ |
|
|
TsNM is non-flammable; polyester with nanofiber membrane; antistatic design; high temperature; acid resistant; |
|
+ |
